Original BinFit dimension illustration
W 204 × D 77.5 × H 115.5 cm
UK wheelie bin storage catalogue
Wheelie Bin Storage
Compare UK wheelie bin stores by size, material and the measurements that matter at home.
Dimensional comparison, not a fit guarantee
Confirm your exact bins, retailer drawings, opening clearance and installation surface before ordering.
2 products found
Records were checked on 23 July 2026. Missing critical values remain marked for manual confirmation.
Original BinFit dimension illustration
Original BinFit dimension illustration
W 200 × D 80 × H 116 cm
Start with the space, not the style
A bin store can look compact in a product photograph and still be too wide for the gap beside your house. Before comparing finishes, record the usable width, depth and height of the site. Check the narrowest point rather than the easiest point to measure, and leave room for anything that projects into the space, including pipes, window sills and gate posts.
Then measure the bins themselves. The capacity moulded into the body is useful for narrowing the choice, but it does not describe the lid, handles or wheels. If your household has bins from different manufacturers, measure each one.
Choose by number of bins
Use our pages for single, double, triple and four-bin storage to remove products that are clearly the wrong size. The Fit Finder adds your available space and opening clearances to that shortlist.
What to compare after size
- Access: front doors need enough clear space for a full bin to roll out.
- Roof movement: a lifting roof may need more height than the closed product dimensions suggest.
- Material: timber, metal and plastic have different maintenance and installation needs.
- Base: check the retailer’s requirements for a flat, stable surface and any anchoring.
If a critical figure is missing from a listing, treat it as a question for the retailer rather than an invitation to guess.
Wheelie bin storage buying guide
Choose by bin count, 240-litre clearance and material
Most UK searches begin with capacity — double, triple or four-bin storage — but the final fit depends on real measurements. A nominal two-bin store is not automatically suitable for every pair of 240-litre bins. Compare each compartment opening, internal width, usable depth and roof clearance against your own bins.
Double wheelie bin storage
A two-bin store is the compact starting point for general waste and recycling. Check that both doors can open fully in the available space and that one bin can be removed without moving the other. Continue with the double wheelie bin storage guide.
Triple or 3 wheelie bin storage
Three compartments add significant overall width. Measure walls, gates, drainpipes and uneven ground, then confirm individual lid access. Compare options on the triple wheelie bin storage page.
Four-bin storage
Large stores need careful route and assembly planning. Check the delivered package dimensions, the opening span and whether the base area is level. See four-bin wheelie bin storage.
Wooden, metal or plastic?
- Wood: natural appearance and repairable parts, with ongoing finish and moisture checks.
- Metal: slim panels and strong structure, with coating quality, corrosion protection and anchoring to check.
- Plastic or resin: lower routine maintenance, but panel rigidity, UV exposure and exact internal clearance still matter.
Use published manufacturer dimensions as the starting point, then leave a practical tolerance rather than choosing a store that only fits on paper. For the material decision, read the wooden vs metal bin store guide.